Orientating Rolls.

Orientating Rolls Description

The Orientating Rolls are precision ground rollers which rotate in opposite directions mounted on a purpose designed framework with integral motor.

The fine setting provided for the distance between the rollers and the angle of inclination enables a wide range of parts to be fed and orientated.

The rollers can be machined to provide a component part inspection capability.

The Orienting Rolls must be securely mounted on a firm base.

The mains supply should be connected to the local isolator. Do not connect the Orienting Rolls directly to the mains supply.

Orientating Rolls Features

The rollers can be adjusted individually at either end and on either side by means of two pairs of grub screws and locknuts.

It is possible to set the rollers parrallel or with a progressive taper to one end.

If frequent adjustment is required it could be helpful to make some setting gauges.

The angle of the rollers can be adjusted to give the optimum angle required for the operation being carried out. This is achieved by releasing the clamp bolts and pivoting the rollers to the required angle and relocking.

Where can you use it?

The Orienating Rolls solid appearance and construction, ease of fitting and adjustment features make them ideal for building into special purpose machines.

Have a look at the machine applications where the Orientating Rolls have been used. You can see other applications in here

Downloads

By registering with the Aylesbury Automation, you will be able to down load 3D CAD "step" files of the range of Orientating Rolls models.

You can down load the basic Euro Series Drive Unit 2D data from here, or a PDF of the sales brochure for the Untooled range of products.